SKYE WiFi 3
TM
Set Up & Installation Manual
ACCU-SCOPE, Inc.
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
- 19 -
No image display in WiFi output mode
1) Confirm that the microscope is turned on, and the light and image are visible in the eyepiece;
2) Confirm that the camera and the mobile device are using the same local area network;
3) If the issue is not eliminated, please contact our customer service group.
Interface problems
External HDMI monitor does not display / display exceptions
1) Confirm the HDMI cable can be used normally (is not bent, broken, etc.);
2) Confirm the HDMI monitor can be used normally (HDMI port is in good and working condition,
etc.);
3) Confirm that the external HDMI monitor can support these resolutions and frequencies:
3840x2160 @30Hz / 1920x1080 @60Hz / 1920x1080 @30Hz / 1280x720 @60Hz;
4) If the issue cannot be eliminated, please contact our customer service group.
For additional support, please contact Customer Support:
Limited Warranty
Digital Cameras for Microscopy
This digital camera is warranted to be free from defects in material and
workmanship for a period of one (1) year from the date of invoice to the original (end
user) purchaser.
This warranty does not cover damage caused in-transit, damage caused by misuse, neglect, abuse
or damage resulting from either improper servicing or modification by other than ACCU-SCOPE or
UNITRON approved service personnel. This warranty does not cover any routine maintenance work
or any other work that is reasonably expected to be performed by the purchaser. No responsibility is
assumed for unsatisfactory operating performance due to environmental conditions such as humidity,
dust, corrosive chemicals, deposition of oil or other foreign matter, spillage or other conditions
beyond the control of ACCU-SCOPE Inc. This warranty expressly excludes any liability by
ACCU-SCOPE INC. and UNITRON Ltd for consequential loss or damage on only grounds, such as
(but not limited to) the non-availability to the End User of the product(s) under warranty or the need
to repair work processes.
All items returned for warranty repair must be sent freight prepaid and insured to ACCU-SCOPE
INC., or UNITRON Ltd., 73 Mall Drive, Commack, NY 11725
– USA. All warranty repairs will be
returned freight prepaid to any destination within the Continental United States of America. Charges
for repairs shipped back outside this region are the responsibility of the individual/company returning
the merchandise for repair.
