Accton Technology WN3501C, Быстрое руководство по установке

Страница: 37 / 50

Quick Installation Guide
29
Advanced Settings
Click the “General” tab (see the screen above). In the “Connect using” field, make
sure that the adapter shown is the WN3501C Wireless USB Adapter.
1. Click Configure . Click the “Advanced” tab.
2. Set the “Fragmentation Threshold” (the default 2,346 means “Disabled”). see
“Terminology” on page 38 for a description of “Fragmentation Threshold.”
3. “Preamble Type” offers a dropdown list with three options: Auto, Long, or Short.
see “Terminology” on page 38 for an explanation of “Preamble Type.”
If you aren't sure whether all the Clients and Access point radios in your wireless
network support the Short RF preamble, then leave this setting on “Auto”
(Default).
4. “Rate (Mbps)” is the data transmission/reception rate setting. It can be set to
Auto, 1 Mbps, 2 Mbps, 5.5 Mbps, or 11 Mbps. Usually this should be set to Auto.
In a radio frequency hostile environment, a lower rate can provide more stable
transmission quality.
5. Set the “RTS Threshold” (the default 2,347 means “Disabled”) to the same as
that used by other devices in your network (see “Terminology” on page 38 for a
description of “RTS Threshold).”