Accton Technology CheetahSwitch Workgroup-3514F, Руководство по управлению

Страница: 40 / 114

Using the System Configuration Program
2-30
You can use the Port Trunking Configuration screen set up port trunks as shown
below:
Port Trunking Configuration
===========================
Trunk ID Status Member List
1 2 3 4
--------- -------- ----------- ----------- ----------- -----------
-- -------- Unit : - Unit : - Unit : - Unit : -
Port : -- Port : -- Port : -- Port : --
-- -------- Unit : - Unit : - Unit : - Unit : -
Port : -- Port : -- Port : -- Port : --
-- -------- Unit : - Unit : - Unit : - Unit : -
Port : -- Port : -- Port : -- Port : --
Trunk ID : 1 Trunk ID : 1 Member Unit : 1
Member Port : 1
[Show] [More]
[Enable] [Disable] [Add] [Delete]
<OK>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Trunk ID Configure up to four trunks per switch.
Status Shows if the selected trunk is enabled or disabled.
Unit* Specifies a switch unit in the stack (1~4).
Port Select from 2 ~ 4 ports per trunk.
[Show] Displays trunk settings, where the first trunk listed is specified by “Trunk ID.”
[More] Scrolls through the list of configured trunks.
[Enable] [Disable] Enables/disables the selected trunk.
[Add] [Delete] Adds/deletes the port specified by
Trunk ID / Member Unit / Member Port.
* Stacking is not supported on the ES3526G.