27
Appendix B: Default Profiles
SETTING
DEFAULT NVRAM
Auto-answer Disabled
Yes
Backspace character 08 No
Bell / CCITT compatibility at Bell 212A Yes
1200 bps
Busy signal detect Enabled Yes
Carriage
return character 13 No
Line feed character 10 No
Data Set Ready option
Always on Yes
Data Terminal Ready option &D2
Yes
Data Terminal Ready pulse width 0.5 seconds Yes
Echo option On Yes
Escape character definition 43 (+++) Yes
Guard
tones Disabled
Yes
Long space disconnect Disabled
Yes
Parity None Yes
Pulse make / break ratio 39/61 Yes
Responses
Word Yes
Response enable
All Yes
RTS-to-CTS delay 10 milliseconds Yes
Speaker status
On until DCD Yes
Speaker volume Low Yes
Test timer setting 0 second Yes
Wait for carrier after dialing 50 seconds Yes
Wait for dial tone 2 seconds No
Wait for dial tone before dialing Enabled Yes
Dial delay pause time
2 seconds Yes
Wait before accepting carrier detect 0.6 seconds Yes
Wait before disconnecting 1.4 seconds Yes
after carrier loss
DTMF tone duration and spacing 95 milliseconds Yes
Flash (!) dial modifier time 0.7 seconds No
PSTN attenuation level -10 dBm No
Fax attenuation level -10 dBm No