Accordance Systems araid 3500, Руководство пользователя

Страница: 3 / 58

2
User's Manual
Thank you for purchasing
ARAID 3500 / S3500
Before you begin, please read the following:
ARAID 3500 / S3500 complies with standard RAID 1 (disk mirroring) and RAID 0 (disk
striping) definitions.
＊
＊
Use Two Identical Hard Drives as possible
We recommend that two identical drives (same brand, model, capacity, place of
production, firmware version) be used with this product for optimal performance
and convenience. The drives used must be brand new or in excellent condition.
Accordance also recommends using the drive manufacturer’s testing tool to scan the
drives for bad sectors and correct mechanical and electrical operation.
＊
Purchase Spare Drives
With new types of drives rolling out to the market at a fast pace, you may not be
able to obtain the same model of the drive in the future. Therefore, we recommend
users purchase a number of identical brand new drives in advance, so ARAID 3500
/ S3500 can be used to its full extent. However, if users cannot obtain identical types
of drives, users may use newer drives made by same manufacturer.
＊
No Need to pre-FORMATTING Brand New Drives
When using ARAID 3500 / S3500, you do not need to do FDISK and FORMAT steps
for brand new drives. You can directly use “Auto-Rebuild” feature to duplicate/
clone new target drive.
＊
Heat Dissipation
ARAID 3500 / S3500 is designed with a 6cm silent and cooling fan with long life.
It provides excellent heat dissipation for two 7200 RPM drives. With two 7200
RPM drives, it is best to use a PC enclosure with excellent overall reinforced heat
dissipation design. It prevents the PC or disk array failures caused by long durations
of poor heat dissipation.
Please DO NOT mix SATA II (3G) with SATA I (1.5G) drives on this device.
Important Please set both primary and secondary drives at SATA II(3G) mode
before installation.
Note : 3G mode is the factory default setting when you purchase drives from market.
＊
When using ARAID S3500
Power on ARAID S3500 will also enable HDD's security feature. This means the
HDD can’t be used in another PC, ARAID model or other RAID System.