-17-
and to the proximity of the stove, when the stove is hot or cold!
-
Never let the stove in operation without a responsible supervision.
-
The refractory concrete segments may have the protruding stainless steel wire on
their surface, it might hurt your skin by unpleasant scratching, piercing, cutting,
especially in the case of segments damaged by unsuitable transport, storage, etc. or
worn and cracked segments when carrying out maintenance, cleaning and repairs of
the stove.
-
In case of open fire, immediately cover the flames with the fire blanket. Thus you
will prevent the fire from spreading!!! Fire blanket is part of the delivery of each
type of cast-iron stove SAHARA. Always have the fire blanket ready and store it at
hand on a suitable place.
-
If you are not sure during any activity or in any situation with regards to the stove,
after you had read the
Operation Manua
l and fully understood and
comprehended it, always for this purpose contact the relevant servicing expert
trained by the manufacturer of the stove as soon as possible at first, then follow
his/her instructions. If it is impossible to contact him/her, do not continue in the
activity or situation.
INSPECTION, CLEANING, MAINTENANCE AND REPAIRS OF
STOVE
We recommend the regular inspection, cleaning, maintenance and
possible repairs of the stove to be done by the competent employee
of the relevant servicing organisation who is trained by the
manufacturer of the stove, at least once a year.
STOVE INSPECTION
Regularly inspect the interior space of the stove through inspection hole (Fig. 1 -
position f), the loading door (Fig. 1 - position a) and ash-can door (Fig. 1 - position b) at least
once every 3 months.
The inspection of the stove should be carried out continuously by monitoring the surface of the
stove even when it is out of operation when no fuel is combusted. As long as any of the stove
seals does not sufficiently fulfil its function, usually due to ending its operation life, it shall be
usually demonstrated by the change of surface colour of the stove on the spot of reduced
tightness (fine deposits of carbon particles can be generated), there shall be the discolouration
