Acconeer XE132, Руководство пользователя, Страница: 17 / 30

Entry module EVK hardware user guide
Page 17 of 30
2020-09-25
© 2020 by Acconeer – All rights reserved
Bottom Side:
3.1.7. Connectors
USB (J1)
USB is used as power supply for the XB132 as well as for flashing and communicating over UART.
USB is connected to the Silicon Labs chip CP2105 which converts the UART interfaces from XM132
into USB data signals. The pinout of J1 is shown in Table 2.
Table 2. The pinout of J1.
Pin Number Signal
1 VBUS
2 D-
3 D+
4 ID (GND)
5 GND