background image

11

English

 Installation

Warning Indicator

!

  When the “LAMP” indicator lights solid red, the projector 

will automatically shut itself down. Please contact your local 

reseller or service center. 

!

  When the “TEMP” indicator lights solid red for about 60 

seconds, it indicates the projector has been overheated. The 

projector will automatically shut itself down.

  Under normal conditions, the projector can be switched on 

again after it has cooled down.  If the problem persists, you 

should contact your local dealer or our service center. 

!

  When the “TEMP” indicator lights solid red, it indicates the 

fan failed. Please contact your local dealer or our service 

center. 

Powering Off the Projector

1.   Press the “Power” button to turn off the projector lamp; you 

will see a message    

 
  displayed on the projector’s screen. Press the “Power” but-

ton again to con! rm, otherwise the message will disappear 

after 5 seconds.

  Please note that if the   key is pressed instead,  the projec-

tor will enter the “Picture Mute” mode and no image will 

be displayed.  To exit the “Picture Mute” mode, press the 

“Power” button again. 

 2.  The cooling fans continue to operate for about 20 seconds 

for cooling cycle and the Power LED will 

turn green

. When 

the Power LED begins " ashing, the projector has entered 

standby mode.

  If you wish to turn the projector back on, you must wait 

until the projector has completed the cooling cycle and has 

entered standby mode.  Once in standby mode, simply press 

“Power” button to restart the projector.

3.  Disconnect the power cord from the electrical outlet and the 

projector.

4.  Do not turn on the projector immediately following a power 

off procedure.

Содержание NOBO X20P


































Отзывы: