10
English
Installation
Powering On the Projector
1. Remove the lens cap.
%
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will
! ash green
.
3. Turn on the lamp by pressing “Power” button on the control
panel.
&
And the Power LED will
turn green
.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically
within “Management” menu; check that “Source Lock” has
been set to “Off”.
!
"
If you connect multiple sources at the same time, use the
“Source” button on the control panel or on remote control to
switch.
Powering On/Off the Projector
!"
Turn on the projec-
tor ! rst and then
the signal sources.
Power
Lens Cap
1
2
