5
www.acclaimlighting.com
CONTROL INPUT CONNECTIONS
The fixtures connected to each XTR Driver can be controlled by any of four external signal
types: DMX, DALI, 1-10V or 0-10V. DMX allows multiple channels to be addressed, whereas
DALI, 0-10V and 1-10V control a single channel to which all connected fixtures will respond
equally (see page 7).
DMX/RDM
A DMX IN port as well as a DMX THRU port (for
optionally linking to other controllers). Each uses a
3-pin terminal block (supplied). See below for useful
DMX tips. Connect your DMX cables to the terminal
blocks as shown here:
Insert the terminal block into the
DMX/RDM IN
socket
and ensure that it fully clicks into place. Repeat for the
DMX/RDM THRU
if the control signal needs to be fed
to another device.
Gr
ou
nd
DM
X-
DM
X+
DMX CABLE RECOMMENDATIONS
•
Indoor exposed or inside conduit above grade:
Belden 9842
•
Indoor plenum:
Belden 82842
•
Outdoor exposed, direct burial, or inside conduit below grade:
Belden 3107DB
Note: Acclaim Lighting can also approve equivalent cable options
Содержание XTR Driver
