Acclaim Lighting Flex 120, Руководство пользователя

Страница: 7 / 14

5
www.acclaimlighting.com
MOUNTING (CONTINUED)
Lay one end of the Flex 120 strip into the channel and gently push the strip down to seat it
in place. For best results use the wheeled install tool [part #: FACIT] to run along and position
the strip correctly. The tool has an indented center so that it places pressure onto the
outside edges of the strip without stressing the LED emitters.
Wheeled
install tool
Once the Flex 120 strip is in place you can fit the lens(es), if used. Insert the lens at one end
of the channel and gently press it down until it clicks into place. Then run your hand along
the lens to clip the remainder into place.
Do NOT use screwdrivers or
other implements to apply
pressure to Flex 120 strips.