Acclaim Lighting AL Graze DC, Руководство пользователя

Страница: 15 / 22

13
www.acclaimlighting.com
Making a temporary control link (AL Graze DC DMX models only)
Each XMT-350 DMX/RDM tool is supplied with a 5-pin male XLR lead that can be used to
make a temporary control input link with the AL Graze DC DMX feed-in cable. Use a 3-pin
terminal block, wire nuts, conn blocks or Wago® connectors to temporarily join the two
cables:
AL Graze
feed-in
cable
Male XLR
lead from
XMT-350
DMX RGB RGBW RGBA Dynamic White
1
Red Red Red 2200K
2
Green Green Green 3500K
3
Blue Blue Blue 5000K
4
Cool White Amber
DMX channel designations
(AL Graze DC DMX models only)
The various AL Graze DC DMX variants apply their LED emitters to DMX channels in different
ways, as summarized in the table below.
The channel allocations above are shown beginning at DMX address 1. When you configure
a fixture with an alternative DMX address, that value will become the first channel in the list
shown above and the other channels will increment from there.