Accessory Power Sona Wave HD, Инструкция по эксплуатации, Страница: 6 / 8

Troubleshooting
The blue
(12) Status LED
will not turn on.
- On the back of the SonaWave HD , please set the (10) Power switch (ON/OFF) to
ON.
- Please make sure that the AC wall outlet you are using is properly working.
There is no music, OR music is distorted / low quality.
- Make sure that both the SonaWave HD and your device are adjusted to a loud
enough volume level.
- Verify that all cables are plugged into the proper ports and that your device is
fully docked.
- Try using diff erent audio sources to make sure the speaker is functioning cor-
rectly, and that the problem is not being caused by your audio device.
- Many times the quality of your MP3, WAV, MIDI, WMV, MP4 or other music fi le
can aff ect the quality of the sound being produced. Please make sure that your
music fi le is to the quality you expect.
- Please remove your protective case before docking device to ensure a good
connection.
The SonaWave HD is not responding to the wireless IR remote.
- Try replacing the battery inside of the remote with a new one. You can go to
most electronic stores to fi nd a replacement. If you are having trouble, call the
retailer or manufacturer.