Product Diagram
Listening to music from your iPhone or iPod
Connect GOgroove SonaWave HD to a power source
The
SonaWave HD
comes with an
(b) AC power adapter
for connecting to any
standard wall outlet. The
(b) AC power adapter
is 100-240v meaning it will work
anywhere in the world with the correct plug add-on.
Insert the barrel tip of the
(b) AC power adapter
into the
(11) DC-In
jack
on the back
of the
SonaWave HD.
Plug the
(b) AC power adapter
into an AC wall outlet. Once
the
SonaWave HD
is connected to a power source just set the power switch to
ON (The power switch is located next to the
(11) DC-In jack
on the back of the
SonaWave HD
). You will see the
(12) Status LED
blink blue to indicate power is
ON. The
SonaWave HD
is now in Standby Mode. When in Standby Mode, the
SonaWave HD
will charge your iPod or iPhone, but it will not play music.
1 - Power Button
2 - VOL -
3 - VOL +
4 - Next
5 - Back
6 - Play/Pause
7 - Dock Connector
8 - Dock Support
9 - Line-In Port
10 - Power Switch (ON/OFF)
11 - DC-In Jack
12 - Status LED
Operating Instructions:
12
10
11
9
1
2
8
7
3
4
5
6
Содержание Sona Wave HD
Страница 1: ...INSTRUCTION MANUAL...