Opening your life
www.accessmatic.com
Opening your life
8
Code:
RP120
Raptor
Figure 13
Figure 14
Item
Button
Description
1.
2.
3.
4.
Short press:
Confirm setting.
Long press:
Enter the function menu setting.
Short press:
Open the door.
Long press:
Increase the resilience.
Press and hold the DOWN button, after 4 seconds, it will scroll to display 0-1-2, choose the number you want.
1=increase the resilience 25% 2=increase the resilience 50%.
Short press:
Close the door.
Long press
：
Restore Factory Settings.
Keep press DOWN button, after 4 seconds, it will scroll to display , then the garage door opener will
restart.
PS: Restart means all settings are back to factory settings, all learning things need to be done again except the
transmitter learning code.
Short press:
a) In the Setting Status, short press
CODE
, it will exit the current operation and return to the standby interface.
b) In the Standby Status, short press the
CODE
, A dot will be indicated in the corner, now entering the code
leaning mode.
Now first click the button on the hand transmitter you want to use, the dot may disappear ,then press again the
same button on the hand transmitter, the dot will flash, here, the code learning is finished.
Long press:
Clear the coded remote.
Press and hold
CODE
button until a letter “C” is indicated on the display.
All stored remotes will be deleted.
Basic button instructions