www.accessmatic.com
Opening your life
Opening your life
7
Code:
BD1522
Bulldog
1522
Figure 4
Figure 5
Gear rack installation
1) Fix the mounting screws to the rack.
2) Put the rack on the output gear, make the rack engage with the output gear then weld the mounting screw to the gate (each screw with
one solder joints firstly).
3) Manually move the gate (gate should be moved smoothly after motor unlocked) to check whether there is a fit clearance between rack and
output gear, as shown in Figure 5.
4) Weld all the mounting screws to the gate firmly.
5) Make sure that all racks on the same straight line.
6) Pull the gate after installed, make sure the entire trip is flexible without any stuck.
Turn on 90°
