Access Virus TI, Руководство пользователя

Страница: 145 / 218

145 SOUND PARAMETERS REFERENCE
Filter Balance
> -64 to +63: Put as simply as possible, this is the relative con-
tribution of each filter to the overall output of the filter section.
Actually a complex set of cross-fades, but the result is highly
intuitive: At -64 you can only hear the output of Filter 1. At 0,
both filters contribute equally. At +63 you can only hear the
output of Filter 2.
Cutoff Link
> Off: The filter 1 CUTOFF knob only affects filter 1.
> On: The upper CUTOFF knob also controls filter 2. The lower
knob (CUTOFF 2) becomes a bipolar (-64 to +63) offset to
filter 1 cutoff instead of an independant value.
Key Follow Base
> C-2 to G8: The pivot-note for Key Follow (see “Key Follow”
on page 142). Notes below and above this point will be
affected by Key Follow.
Pan Spread
Only visible here in Split mode (see “Routing” above).
> 0 to 127: The stereo width of the Split mode signal i.e. the rel-
ative levels of the left and right signals. Pan Spread also
applies to Unison sounds, and is therefore mirrored in the
Master edit menu (see “Unison” on page 131). Modulation
destination “Pan Spread“.
Filter Envelope
Please refer to the images in “The Amplifier Envelope Section”
on page 21.
Attack
Accessible from the panel via the upper ATTACK knob.
> 0 to 127: The time it takes for the filter envelope to rise from 0
to maximum.