Access Virus TI, Руководство пользователя

Страница: 14 / 218

14
If a menu is already open, selecting a different element within
the same section (e.g. LFO3 instead of LFO1, OSC1 instead of
OSC2 or LOW EQ instead of REVERB) will jump to the new
menu.
How to change values within menus
Use the VALUE knobs below the display. Whenever you enter
a menu page, one of the parameters will already be active
(indicated by a triangular cursor). Its value can be decre-
mented/incremented via the VALUE buttons. To move the cur-
sor without changing values, hold down SHIFT and press one
of the PARAMETERS buttons.
There is actually a system parameter which governs how the
PARAMETERS buttons work – see “Navigation” on page 163.
How to close menus
To exit any menu, press the
Û
EXIT button to the left of the dis-
play. It is not necessary to press
Û
EXIT before opening a new
menu. Re-selecting the current basic mode (SINGLE, MULTI)
will also exit menus.
Different Ways of Working
Single mode
This is the standard mode for playing just one sound at a time.
The next chapter is a simple but detailed tutorial to help you
become familiar with Single mode operation.
Multi mode
Your Virus can play 16 different sounds at the same time:
MULTI programs contain 16 PARTS, each equivalent to a
SINGLE program plus a few additional parameters such as
MIDI channel, fine tuning, key range etc..
Unlike earlier Virus models and many other synthesizers,
MULTI programs in the Virus TI do not simply reference indi-
vidual sounds, but actually
contain the data, including all
effects. Multi mode is therefore predestined for more complex
programs.
Whenever the Bank or Patch parameters (see “Patch” on
page 166) are changed, the corresponding Single program is
copied into the current Part of the Multi program. For details
about Multi mode parameters, see the “Multi Mode Reference”
on page 165.