manualshive.com logo in svg

Access VIRUS C SERIES, Руководство пользователя

Поделиться
Скачать
Access VIRUS C SERIES Скачать руководство пользователя страница 174

172  CHAPTER 18

The Virus and Sequencers

HANDLING MIDI PARAMETER CONTROL

If you have configured your MIDI system 
in accordance with the instructions in 
the previous section, you may activate 
the sequencer’s recording mode and 
record the knob and button movements 
as you see fit. Check the Event or List edi-
tor of your sequencer to see if the 
recording operation was successful.

Good-to-know info: Do not record knob 
and button movements to the same 
track that contains the notes of any 
given passage. Instead, use a new track 
that sends its data to the same MIDI out-
put and channel as the track containing 
the notes. Although the sequencer 
merges these two data streams inter-
nally, separating the two tracks makes it 
easier for you distinguish between the 
information that they contain. Besides, 
you’re thus able to edit and copy the 
recording of t knob and button move-
ments without affecting the actual notes 
on the other track.

If you wanted to take this an extreme, 
you could record the movements of 
every knob and button to a separate 
track. Although this sounds like a classic 
case of overkill, it can facilitate the pro-
cess of editing the recorded sequences: 
Bear in mind that the sequencer doesn’t 
indicate the parameters addressed via 
the control features of the Virus by their 
names; instead, it indicates merely the 
controller and/or polypressure numbers. 
If you split up these control features by 

recording them to different tracks and 
giving these tracks names that give you 
an idea of what they contain, you’ll find 
it much easier to work with these tracks.

Содержание VIRUS C SERIES




































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды