Access RAD ASMi-54, Инструкция по установке и эксплуатации

Страница: 71 / 126

Installation and Operation Manual Chapter 4 Configuration
ASMi-54 Ver. 1.0 Configuring for Operation 4-21
Table 4-7. Bridge Port Parameters
Parameter Possible Values Remarks
Bridge Port
Number 1 - 6 Bridge port number.
Default: 2
Note: Bridge port number 1 is reserved for the host bridge port.
Bind
The type of port to be bound. To configure a bridge port, see
Configuring a Bridge Port .
Activation Enable
Disable
Specifies if this port is part of the bridge or not. Press the option
number to toggle enable/disable.
Default: Enable
Ingress Filtering Enable
Disable
When Enabled, the device discards incoming frames for VLANs which
do not include this Port in its Member set. When Disabled, the port
accepts all incoming frames.
Default: Disable
Note: Appears only when in VLAN-Aware mode.
Accept Frame
Type All
Tag Only
Tag Only specifies that the device discards untagged frames. All
specifies that untagged frames received on this port are accepted
and assigned to the PVID for this port.
Default: All
Note: Appears only when in VLAN-Aware mode.
Port VID /
Stacking VID 1–4094 This is the PVID, the VLAN ID assigned to untagged frames or
priority-tagged frames received on this port. If Stacking is enabled,
this is the tag to be added.
Default: 2
Copy Original
Priority Enable
Disable
Copy priority from original frame.
Default: Disable
Default Priority
Tag 0-7 Default VLAN frame priority. Applies to untagged frames.
Default: 0
Egress Tag
Handling Stacking
Stripping
None
Stacking: Adds the PVID to every frame transmitted from the port.
Stripping: Removes the first VLAN tag from every transmitted frame,
on the egress of the port.
Default: None
Ingress Tag
Handling Stacking
Stripping
None
Stacking: Adds the PVID to every frame received on the ingress of
the port.
Stripping: Removes the first VLAN tag from every received frame, on
the ingress of the port.
Default: None