Access RAD ASMi-54, Инструкция по установке и эксплуатации

Страница: 105 / 126

Installation and Operation Manual Chapter 6 Diagnostics and Troubleshooting
ASMi-54 Ver. 1.0 Handling Alarms and Traps 6-19
The Event Log file contents can be viewed via an ASCII control terminal or a
Network Management Station (NMS).
The contents can be cleared at any time.
All traps (alarm and system) can be masked per manager. See Manager List in
Chapter 4 .
Displaying the Event Log File
ASMi-54 has an integrated NTP client. The NTP client is used as a means to
receive the date and time from the network. When the NTP server is properly
configured and accessible, the device displays the real date and time as was
received from the NTP server, instead of the system uptime, which is the default
state.
When the real date and time are not available, the log file messages are recorded
with the date 00-00-0000 and system uptime. Once the NTP server becomes
available, all messages (including those already received) appear with the real
date and time.
To access the Event Log file:
1. Select Main Menu>Monitoring>System.
The Monitoring screen appears (see
Figure 6-1
).
2. Select System.
The Monitoring System screen appears (see
Figure 6-2
).
3. Select Event Log.
The Event Log screen appears (see
Figure 6-22
and
Figure 6-23
).
Table 6-
14
and
Table 6-15
present the event types that appear in the Event Log
file.
4. Use the arrow keys to scroll the event list up and down, left and right.
ASMi-54
Main Menu > Monitoring > System > Event Log
Source Description Information Severity Date Time
1 PME Port 1 LINK_DOWN PME port Major 00-00-0000 00:00:01
2 PME Port 2 LINK_UP PME port Major 00-00-0000 00:00:02
3 Eth Port 4 LINK_DOWN Eth port Major 00-00-0000 00:00:04
C - Clear Table
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 6-22. Typical Log File Before NTP Server is Accessible
Note