2)
Pick up the receiver in standby mode and press the K4 switch to replace a group of
ring tones. Four groups of ring tones cycle:
Group1 Group2 Group3 Group4
press K4
press K4
press K4
press K4
3)
Put the receiver down to exit the settings
5.4 Ring tone Volume Setting
1)
There are three kinds of ring tone volume (low-range, mid-range and high-range) to
choose from
2)
Pick up the receiver in standby mode and press the K3 switch to adjust the volume
Low-range
Mid-range
High-range
press K3
press K3
press K3
3)
Put the receiver down to exit the settings
6. Specification
●
Power Supply:
DC24V
●
Power Consumption:
standby 2.1mA, working 75.9mA
●
Wiring:
2 wires, non-polarity
●
Dimension:
187(H) X 97(W) X 33(D) mm
The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved.
ACCESS
SECURITY
PRODUCTS
LTD
