2
4
2
CERTIFICATION:
ETL WET
NO.
20399LEDMG
3
MOUNT THE BACKPLATE
Fit the backplate up to the crossbar.
Align the holes of backplate and secure with
the supplied screw nuts.
MOUNT THE FIXTURE AND COVER THE SHADE
Align the fixture holes with the backplate screw and
secure with the supplied screw knobs (with screw gaskets)
Slide the cover shade into its designated slot from the top.
* This fixture is wet location rated. In order to ensure
that moisture does not enter the outlet box and cause
a short circuit, clear caulking should be used to seal the
space between the fixture mounting bracket and the
wall. Ensure that a space is left at the bottom to allow
for the escape of moisture. It is recommended that
Indoor/Outdoor Silicon Sealant be used for that purpose**
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
