Access IS LSR118, Руководство по эксплуатации продукта, Страница: 25 / 77

Page 25 of 77 Copyright © Access-IS 2020
Command Description Default Parameters/Range
AISOF1
Illumination off time 1.
Applies to
AISILL
modes 2 and 3 only
(adaptive illumination on).
Each unit is equivalent to 100
milliseconds.
1 0
–200
AISOF2
Illumination off time 2.
Applies to
AISILL
modes 2 and 3 only
(adaptive illumination on).
Each unit is equivalent to 100
milliseconds.
2 0
–200
AISOF3
Illumination off time 3.
Applies to
AISILL
modes 2 and 3 only
(adaptive illumination on).
Each unit is equivalent to 100
milliseconds.
5 0
–200
5.3.1 Adaptive illumination modes
The illumination modes allow you to configure the device to provide the best lighting to read
barcodes on different types of media.
5.3.1.1 0 - Off (Phone only)
Adaptive illumination is off. The illumination LEDs do not light when you present media to the
device.
5.3.1.2 1 - Off (Paper only)
Adaptive illumination is off. The illumination LEDs light when you present media to the device. The
LEDs illuminate until the device reads the barcode or you remove the media.
5.3.1.3 2 - On (Paper optimised)
Ada
ptive illumination is on. The illumination LEDs switch ‘On’ and ‘Off’ continuously when you
present media to the device.
The LEDs cycle ‘On’ and ‘Off’ until the device reads the barcode or you
remove the media. Use the illumination commands in Table 4 to set
the ‘On’ and ‘Off’ time.
5.3.1.4 3 - On (Phone optimised)
Adaptive illumination i
s on. The illumination LEDs switch ‘Off’ and ‘On’ continuously when you
present media to the device.
The LEDs cycle ‘Off’ and ‘On’ until the device reads the barcode or you
remove the media. Use the illumination commands in Table 4 to set
the ‘Off’ and ‘On’ time.