18
Man ual W M-IIRO -8
Error Codes
The following error codes can be returned from the pod:
1:
Invalid channel number (too large, or n ot a num be r. All channel numbers m ust be between
00 and 17 , in hex. (0-24 decima l))
3:
Im prop er Syntax. (No t eno ugh para m eters is the u sua l culprit)
4:
Channel number is invalid for this task (For example, if you try to output to a bit that is set
as an input bit, this error code will occur)
9:
Parity error. (Th is occurs wh en s om e pa rt of the rece ived d ata c onta ins a p arity or framing
error)
Additionally, several full-text error codes are returned. All begin with "Error, ", and are useful when
using a terminal to program the pod.
Error, Unrecognized Command: {command received} [CR]
This occurs if the comm and is not recognized.
Error, Command not fully recognized: {Comm and received} [CR]
Th is occurs if the first letter of the c om m and is valid, bu t the rem aining letters a re no t.
Error, Address command must be CR terminated [CR]
This occurs if the address comm and (!xx[CR]) has extra characters between the pod number and the
[CR ].
