Acces WM-IIRO-8, Руководство пользователя

Страница: 12 / 22

12 Man ual W M-IIRO -8
Command List
I Re ad a ll 8 digital bits. xxCR
Ixx Read a single digital bit. (00<=xx<=0 7) bCR
Oxx0xx Ou tput all 8 digital bits. CR
Ox± Output either high or low on bit x CR
Oxx± Output either high or low on bit xx CR
Ox±xx Output either high or low on bit x for time xx CR
Oxx±xx Output either high or low on bit xx for time xx CR
Y Re ad d igital input C OS bit and clear bit Y or N
Txx Set bit 00-07 Mask for COS bit flag, 1=change will set COS CR
Dx± Set digital input active state high or low on bit x CR
Dxx± Set digital input active state high or low on bit xx CR
Cxx Read digital input xx counter (counts ea ch active pulse) xxCR
or Read pulse/free-run output xx counter and reload value xxCR
Rxx Reset digital input counter xx to 0000 CR
Ra ll Reset all digital input counters to 0000 CR
V Read the Firmw are version num ber x.xxCR
N Resend last response varies
H* Gree ting mes sage: cop yright, firm ware version num ber varies
BAUD=xxx Set new baud rate. Each x is code number for new baud =:Baud:0x
POD=xx Set pod address to xx varies
PROG RAM= Begin process of uploading custom program to pod special
D Download historical storage of digital input data again varies
FASTDATA Ac qu ire bits 0-7 as fas t as poss ible, the n disp lay varies