ACCES I/O Products, Inc.
MADE IN THE USA
mPCIe-LAN-GbE Manual
3
Rev B1
connectors to work with either mPCIe or mSATA devices
–
and,
according to the standards for mPCIe and mSATA they are
supposed
to do so! However, some PC manufacturers ship computers that
only
support mSATA devices. Please confirm in your PC
documentation that your edge-connector is
actually
PCI Express
Mini Card compliant before installing this, or any, mPCIe card.
Damage might occur if you install an mPCIe device into a computer
that only supports mSATA.
mPCIe defines mounting holes for securing the otherwise loose end
of the card, so it is impossible for these cards to wiggle or flap
themselves loose (which was a recurring problem with the older PCI
Mini devices). Eliminating this concern for PCI Express Mini Cards is
a major reason this standard has seen rapid adoption by the Data
Acquisition and Control industry.
The mPCIe standard, like its PCI Mini Card predecessor, was
designed assuming use primarily in Laptop or Notebook and similar
devices, where physical dimension is often the paramount design
constraint. In Data Acquisition and Control applications low-weight
combined with vibration tolerance tend to be of more concern.
C
HAPTER
6:
I/O
I
NTERFACE
The card incorporates a 12-pin right-angle latching connector
suitable for rugged environments. When used with the CAB-mPCIe-
LAN optional cable accessory this 12-pin embeddable connector is
broken out to a standard RJ45 panel-mount connector.
On Card Pin Assignments
Function
Pin Name
Pin Pin
Pin Name
Function
Ethernet Link/Activity
LINKACT LED
1
7
SPEED1000
1000Mbps speed ind
MDIx LANE 1 Positive
LAN1+
2
8
LAN0+
MDIx LANE 0 Positive
MDIx LANE 1 Negative
LAN1-
3
9
LAN0-
MDIx LANE 0 Negative
MDIx LANE 3 Positive
LAN3+
4
10
LAN2+
MDIx LANE 2 Positive
MDIx LANE 3 Negative
LAN3-
5
11
LAN2-
MDIx LANE 2 Negative
100Mbps speed ind
SPEED100
6
12
3.3V
+3.3V voltage rail
RJ45 Pin Assignments
Pin
Pin Name
Function
1
LAN0+
MDIx LANE 0 Positive
2
LAN0-
MDIx LANE 0 Negative
3
LAN1+
MDIx LANE 1 Positive
4
LAN2+
MDIx LANE 2 Positive
5
LAN2-
MDIx LANE 2 Negative
6
LAN1-
MDIx LANE 1 Negative
7
LAN3+
MDIx LANE 3 Positive
8
LAN3-
MDIx LANE 3 Negative
C
HAPTER
7:
S
OFTWARE
I
NTERFACE
This card provides a standard 10/100/1000 Ethernet Interface using
the Intel I210 PCI Express to Ethernet Bridge chip, and operates
seamlessly using your operating systems
’
native Ethernet utilities
and driver stack. Configure and operate the Ethernet port as you
would any other; refer to your operating system manual for specific
information, if needed.
The latest information can always be found on the product page on
the website. Here are some useful links:
Links to useful downloads
Main web site
Product web page
This manual
accesio.com/MANUALS/mPCIe-LAN-GbE.pdf
Windows Software
Install Package
accesio.com/files/packages/mPCIe-LAN-GbE
Install.exe
Intel I210 Driver
https://downloadcenter.intel.com/product/6
4399/Intel-Ethernet-Controller-I210-Series
C
HAPTER
8:
S
PECIFICATIONS
PC Interface
PCI Express Mini Card
Type F1 “Full Length”
Ethernet I/O
Protocol
10/100/1000 Base T
Environmental
Temperature
Operating -40° to +85°C
Storage -40° to +85°C
Humidity
5% to 95%, non-condensing
Power
required
+3.3VDC @ 176mA (1000Mbps)
+3.3VDC @ 109mA (100Mbps)
+3.3VDC @ 86mA (idle, no link)
Physical
mPCIe board characteristics
Weight
Ounces 0.19
Size
Length
50.95mm (2.006”)
Width
30.00mm (1.181”)
I/O connector
On-card
On-cable
Amphenol FCI 98417-G61-12ULF
Amphenol FCI 10073599-012LF
