Accent TRK2 Series, Руководство по эксплуатации

Страница: 8 / 19

TRK2XX Initiation Manual
11
Figure 1 - TRK back cover bolts position.
The steps to reinstall the back cover are:
1. Check the back cover position against the top part of the TRK device. See Figure 2 for
more details of correct alignment.
2. Before to close check that the o-ring seal is in the correct position. The o-ring have to
be placed all over the TRK top part edge.
3. Place the back cover over top part and screw the 4 HEX screws.
8. SIM card installation
TRK2XX series uses cellular technology to communicate with cloud based platform. To enable
this communications is mandatory to insert a SIM card. The steps to install a sim card are:
1. Remove back cover as described in the section number 3 of this document.
2. Open SIM card holder as is shown in the figure 3.
1.5mm HEX key