Accent
TM
Hardware Manual
Accent
TM
1200-10 Hardware Manual 4
LOW BATTERY INDICATOR
The device has batteries that run the NuVoice system software and firmware. These batteries are
under the battery doors on the back of the device.
When these batteries are low, the LED will light and a warning tone will sound.
Once the charger is plugged in, the Low Battery LED will eventually go off and the
Battery Charger
LED will flash.
The device also contains an internal battery that runs the Windows system software. This battery is
separate from the Accent/NuVoice batteries. The Accent battery charger charges all the batteries.
When the Low Battery LED is lit, always plug in the charger. When the battery warning sounds you
will no longer be able to save changes and eventually the device will completely shut down.
TOOLS Key
In NuVoice, the
TOOLS
key
is to the right of the Text Display Area. Select this key to open a
menu of often-used Tools. See the
TOOLS Menu
in
Help
on the device for more information.
CAMERAS
The front camera is located in the center of the device directly below the Accent 1200 logo.
The rear camera is located on the upper right side on the back of the case (see
Back View
).
To Use the Cameras
In NuVoice:
•
Select the
TOOLS
button.
•
Open the
Toolbox
.
•
Select the
CAMERA
Menu.
•
To switch between the front and rear cameras, select
Choose Camera
.
The
Front Camera
is OV2720.
The
Rear Camera
is RG2102LCY.
IMPORTANT NOTE
! The
rear camera
in the
Windows
Camera Menu
(requires integrated
option) must be enabled through NuVoice prior to use.
•
Select the
TOOL
S button.
