Accent
TM
Hardware Manual
Accent
TM
1200-10 Hardware Manual 32
•
Plug in the battery charger.
•
If the indicator lights on the front of the case are not glowing, press the
ON
button.
•
When the device is working again, replace both battery doors.
If the device is still not working, see the
Restoring Windows
instructions below.
Restoring Windows
IMPORTANT: The following instructions are for Accent devices that have the integrated option
enabled and can access Windows. If your Accent is a dedicated device and cannot access Windows,
contact t
he PRC Service Department at (800) 262
-1990 for restore instructions.
IMPORTANT NOTE:
The restore process will
erase everything
on the device's hard drive.
Including internet access, programs, and hardware drivers.
Before restoring the device
, call the PRC Service Department at (800)
262
-1990.
Outside the U.S., call your local PRC distributor.
The restore process generally takes anywhere from 30 minutes to an hour
. It is recommended
that the restore process be monitored from the time it begins through its completion.
•
Plug in the battery charger.
•
Pull the Windows
Charms
menu from the right side of the display.
•
Select
Settings
.
•
Select
Change PC Settings
in the lower right corner of the menu.
•
Select
General
from the
PC Settings
menu on the right side of the screen.
•
On the right side of the screen, scroll down to
Remove everything and reinstall Windows
•
Select
Get Started
.
•
A blue screen appears explaining the next steps in t the procedure. Select
Next
.
•
A blue screen appears with the following options: “
Just remove my files”
and “
Fully clean the
drive.”
Select “
Just remove my
files.”
The “
Fully clean the drive”
option may take 2.5 hours to complete and is not necessary.
•
Another blue screen appears stating that Windows is ready to reset the computer. Select
Reset
to continue or
Cancel
to stop the restore process.
When the Restore is Complete
•
Follow the
Windows Setup and Customizing
instructions that appear on the screen.
