Accelleron A100-M radial, Руководство по сборке

Страница: 13 / 24

Assembly Instructions / Turbochargers A150-M.. - A155-M..
4 Installing the turbocharger / 4.2 Placing the turbocharger on the bracket
© Copyright 2023 Turbo Systems Switzerland Ltd. All rights reserved. HZTL455311P0006_EN Rev. D April 2023
4.2 Placing the turbocharger on the bracket
Fig. 5: Fitting the turbocharger 1
Step A – Preparing the fixing screws
1. Insert expansion bush (42190) into bearing casing.
2. Screw the clamping nut (42201) flush onto the threaded rod (42191). The hexagon of the thread
screw is at the top.
3. Place the thrust washer (01) of the clamping nut on the expansion bush and, with the clamping
nut screwed on, guide the threaded rod through the thrust washer, expansion bush and bearing
casing.
Step B – Preparing the positioning
u
Screw the centering bush (42193) flush onto the threaded rod from below.
u
Clean the surface of the bracket, the bearing casing, the centering bush and the centering holes
in the bracket.
u
Make sure that the covers of the oil connections are removed.
u
Make sure that the position of the oil inlet of the bracket matches the oil inlet hole in the bearing
casing.
u
Make sure that the O-rings are placed correctly in the slots.
Page
11
/
21