Accelerated 6330-MX, Руководство пользователя

Страница: 98 / 140

LAN port with IP passthrough LAN port with IP passthrough
Difficulty level:
Intermediate Intermediate
Goal Goal
To setup a device attached to a specific LAN Ethernet port to receive the passthrough IP
address of the 63xx-series router's cellular modem connection.
Setup Setup
This article assumes the LAN ports are operating under default settings, which provide DHCP
connectivity to devices connected to the 63xx-series router's LAN ports. For more details on the
default settings of the 63xx-series router, see the Default Settings Default Settings section of the User's Manual .
You will need to establish the following details before configuring the 63xx-series router.
• The 63xx-series router must be running firmware version 17.5.86 or higher. The 63xx-series router must be running firmware version 17.5.86 or higher.
• The LAN Ethernet port you want to connect your client device to so it receives the
passthrough IP address.
Sample Sample
The following diagram shows a sample setup of a 63xx-series router with LAN port 4 setup to
provide the IP address of the cellular modem connection as a passthrough to the client device
connected to port 4. Client devices connected to LAN ports of the 63xx-series router or its WiFi
networks will receive a DHCP address in the 192.168.0.x/24 range from the router like normal.

Important: Important: The client device receiving the passthrough IP will only be able to use the 63xx's cellular
WAN connection. Meaning, if the 63xx-series router has a second WAN connection through its WAN
Ethernet port, the client device with the passthrough IP will not be able to send traffic through the 63xx's
WAN Ethernet interface.
Accelerated Notices
Page 98 Page 98 6330-MX / 6335-MX