Accelerated 6330-MX, Руководство пользователя

Страница: 112 / 140

Remote Access Remote Access
Skill Level:
Moderate
(assumes familiarity with SSH sessions)
Goal Goal
To SSH into an Accelerated device remotely, using the terminal available via Accelerated View
and a publicly reachable IP address.

If your device does not have a publicly reachable IP address, you can still leverage the Terminal on Unit Terminal on Unit
via the Accelerated View IPSec Tunnel via the Accelerated View IPSec Tunnel .
Setup Setup
Devices can be managed over SSH so long as the external zone is enabled for remote SSH and
web UI access.

The default credentials are:
Username:
root
Password: default
NOTE: NOTE: The configuration steps outlined below will open external access to your Accelerated device. It is
imperative that the default password is changed to a more secure key to prevent intrusions.
Sample Configuration Sample Configuration
Open the configuration profile of the device and expand
Services Services
. Under
Web Administration Web Administration
,
expand
Access Control List Access Control List
and
Zones Zones
to create a new entry for "External." Repeat this process
for the
Zones Zones
associated with the
Access Control List Access Control List
under the
SSH SSH
menu heading. The
following steps reflect the sample setup indicated in the screenshot below:
1. Under Services -> Web Administration -> Access Control List Services -> Web Administration -> Access Control List , expand Zones Zones .
2. Add a new entry for "External."
3. Under Services -> SSH -> Access Control List Services -> SSH -> Access Control List , expand Zones Zones .
4. Add a new entry for "External."
Accelerated Notices
Page 112 Page 112 6330-MX / 6335-MX