T Series
ConfigurationSetup Manual_Version 200807
17
Dynamic PTZ Setup
There are many types of PTZ
cameras and each communicates
using unique or common protocol.
In this setup, a physical PTZ
camera is assigned to a logical
camera (system’s video channel)
and protocol is identified.
Select camera (
) in the camera selection window
All cameras are selected if
button is selected.
Select
when each camera needs to be setup individually.
(Example: Select
by the right button of the mouse and setup each camera and select
and confirm OK.)
Activate menu by selecting dynamic PTZ tap
Select the camera that is currently used by selecting PTZ device using scrawl bar
button.
Currently Supported PTZ camera protocols:
PELCO-D
KALATEL_KTD312
VICON
Samsung_SCC641
Samsung_SSRX100A
LG_LPT_A100L
Fine CRR1600
SJ-1000
ORX-1000
UNITEC
Sunjin
Select HW address for the same device of the PTZ setup using scrawl bar
button
Setup specific features to connect PTZ device by selecting
button After input Baud
rate, data bit, stop bit, parity bit value provided in the PTZ device user manual, save it by
5
3
4
2
1
