Accel FX POWER SOURCE 12, Руководство пользователя

Страница: 10 / 11

FX Power Source 12 Mounting Instructions
Mounting pattern template:
For those who already have a different pedal board other than our Accel applicable XTA models
of pedal boards that fit this power supply. A mounting template and our standard M4 thread
mounting hardware have been provided.
(The following “Warning” & “Cautions” has been mention before in the Warnings &
Caution pages and now reemphasized for you safety)
Warning!!!
If you are mounting into a surface thicker than .125" [3.18mm] or thicker, a longer screw may be
required. Remember that Max protrusion depth into the power supply must be no more than .250"
[6.35mm].
Do not drill into power supply.
If these warnings are not heeded electrical shock or death may occur.
Caution!!!
Do not do not block air vents.
Do not mount in an area where no air circulation is present.
Do not mount in an enclosure with no ventilation
(Metric dimensions are in millimeters & [ ] brackets)
9
.250
6.3
MAX
.250
6.4
MAX
.25 [6.35] MAXIMUM MOUNTING SCREW PROTRUSION INTO POWER SUPPLY
(PEDAL BOARD MOUNTING SURFACE)
POWER SUPPLY VENTS
(DO NOT BLOCK)