Acard ARS-2030L Скачать руководство пользователя

Страница: 70 / 72

ARS-2030L/2032 Manual

Verify Hard Disk OK!

................................... The hard disk is verified successfully.

Verify Hard Disk Fail!

............................ The hard disk is not verified successfully.

Verify Partition Header!

.................................................. Verify the partition header.

Select HD First!

................................................ Select a formatted hard disk at first.

3. Audio Editing:

Erase selected Tracks?

............................. Abort the selected tracks and delete them.

End edit disc and burn?

................... Finish the music disc editing and start to copy.

Continue edit next Disc?

.............. Ask if you want to continue the music disc editing.

Target Overflow Re-Select

........... The disc capacity is not enough to store the

selected tracks. Please select again.

Close all disc’s session?.

.................................. Confirm the closing of disc sessions.

Can’t edit HDD.

.................... The hard disk cannot be edited as a source audio disc.

NO AUDIO track in this disc

.......................... The source disc has no audio track.

Insert next disc.

................................................................. Insert the next audio disc.

Sessions were closed already!

................ The disc sessions have already been closed.

Burn or Move to partition?

................ Do you want to directly copy the data into

disc or move them to the partition.

Tgt overflow, del last trk?.

........ The disc capacity is not enough to store the selected

tracks. So, do you want to delete the last track?

Ins empty disc Continue?

.. Do you want to insert a blank disc and continue copying?

4. Firmware Update:

Invalid firmware

................................ The disc doesn’t contain a valid firmware.

Updating F/W

................................................The system is updating the firmware.

Update F/W xxx to yyy?

...... Do you want to update the firmware version from xxx

to yyy?

Searching F/W

................................... The system is searching for a valid firmware.

Содержание ARS-2030L









































































Результаты поиска

Содержание ARS-2030L

Отзывы:

Похожие инструкции для ARS-2030L

Бренды по названию

Популярные бренды

Acard ARS-2030L, Руководство пользователя

Результаты поиска

Содержание ARS-2030L

Отзывы:

Похожие инструкции для ARS-2030L

Бренды по названию

Популярные бренды