Acard AEC-7763LC страница 8 Скачать руководство пользователя

Страница: 8 / 63

AEC-7763LC/LD & ARS-2022/2022D

3.2 About HDD Installation

With a 3.5” hard drive you can use and enjoy the function of Image. In other words,

you have one more choice to duplicate a CD or DVD from an image file stored in the

hard drive.

3.2.1 With a HDD

If you install a 3.5” hard drive to ARS-2022DS, the operation procedures will be as

follows.

Once ARS-2022D detects the hard drive, it will ask if you want to format

or not. In CD a partition has 1GB while in DVD 5GB.

Use function 8 Select Source to set the hard drive as the source.

In function 9 Image select a partition to store the data.

If there is no data in a selected partition, place a source DVD into DVD-

ROM and use function 9-01 Load to transmit data from DVD into the selected

partition by pressing

ENT

. Different data can be stored in different partitions.

Switch to function 1 Copy by pressing

▲

. Place a blank DVD disk into

the DVD writer, and press

ENT

to start copying.

When copying comes to an end, the passed DVD will eject automatically.

The default is automatic ejecting, but you can change it.

The failed DVD will remain in the writer. The default is keeping a failed

DVD in the writer, but you can change it. To take the failed DVD you need

to press the button on the writer.

During operation do not press any button on ARS-2022D, because

interruption will harm the device, and DVD will be damaged.

There are 12 functions for you to use. Function 1 is Copy. You can press

▼

to see

other functions.

Содержание AEC-7763LC
































































Результаты поиска

Содержание AEC-7763LC

Отзывы:

Похожие инструкции для AEC-7763LC

Бренды по названию

Популярные бренды

Acard AEC-7763LC, Руководство пользователя

Результаты поиска

Содержание AEC-7763LC

Отзывы:

Похожие инструкции для AEC-7763LC

Бренды по названию

Популярные бренды