14
AEC-7763LC/LD & ARS-2022/2022D
After selecting the source such as DVD-ROM, you can press
ENT
, and LCD will
show the message as follows.
Suppose you select HDD as the source and try to copy from one of its partitions, but
the partition contains no data, an error message will appear on LCD. At this moment,
you can switch to another partition that contains data, or use function 9 Image to
load the data into the chosen partition first.
DVD-ROM selected!
5.9 Image
Function 9 Image is valid only when you have installed a hard drive. This function
includes 6 parts. They are Load, Delete Image, Image Info, Compare Image, Select
Image and Select Src Drive. The loaded data is called an image file.
Select function 9.
9.Image
5.9.1 Load
On the above figure press
ENT
, and you will enter the following figure. The function
Load is to let you load data from DVD-ROM or DVD writer into the current partition
of the hard drive. P:A means partition A.
9-01.Image P: A
Load
