11
ACARD AEC-6880M
2.5 Configuring ACARD AEC-6880M
(Jumper Setting)
RAID DIP Switch Setting
RAID configurations must be set up on ACARD AEC-6880M. Set RAID
Mode by adjusting ON/OFF DIP Switch.
Please follow the instructions below and decide a suitable RAID DIP Switch
setting.
1.
Normal Mode. When using the RAID adapter card as an IDE exten-
sion port to connect the IDE hard drive, set the DIP Switch 1 and 2 as
OFF. The default is OFF.
2.
Striping Mode (RAID 0). RAID 0 is dedicated as a pair of hard drives
that store striping data, but appears as a single drive on the computer.
Set the DIP Switch 1 as OFF and 2 as ON, and the RAID 0 mode will
be activated.
3. Mirroring Mode (RAID 1).
RAID 1 is a pair of hard drives
that store mirroring data, and
is regarded as a single drive.
Sett the DIP Switch 1 as ON
and 2 as OFF, and the RAID 1
mode will be activated.
R AID D IP
S witch
1 2
O N
(Default setting)
N orm al
M ode
1 2
O N
Striping
M ode
1 2
O N
M irroring
M ode
1 2
O N
