AEC-67162M Manual
6
Chapter 2 Hardware Installation
2.1 Board Layout
2.2 Install the Adapter
The layout of AEC-67162M board is shown as follows.
Please follow the steps below to install the adapter AEC-67162M.
(1). Power off the Mac computer.
(2). Unplug the power cord of the Mac computer.
(3). Open the Mac computer’s case (refer to Mac Hardware Installation Guide).
(4). Locate an unused PCI expansion slot. Unscrew and remove the slot cover.
(5). Insert the adapter’s PCI edge connector into the slot firmly (as figure on P.7).
(6). Screw the adapter to the PC frame.
(7). Close the Mac computer’s case.
Channel B Channel A
(CN3)
(CN2)
Channel B
(CN1)
Channel B (CN1): 68-pin Ultra160 LVD SCSI external connector
Channel A (CN2): 68-pin Ultra160 LVD SCSI internal connetor
Channel B (CN3): 68-pin Ultra160 LVD SCSI internal connector
