3.2.3 Windows 95/98 Environment
Automatic Setup
Install Automatic Setup for Windows 95/98/NT4.0 before plugging your
SCSI adapter into system.
1. Insert disk1.
2. Press [Start] then click on [Run].
3. Type
A:\setup32.exe
or press [Browse] to find this file.
4. Press [enter]. Then it will install SCSI driver, utility and
“
OnNow
”function automatically.
5. Shut down your system.
After your complete software automatic installation, plug
your SCSI adapter into your system. Please refer to “
Hardware
installation
” .”. Then boot up your computer. The system will setup
the configuration automatically.
Manual Install Procedure
You can install driver manually after you plug in your AEC6710S/6712S.
Then follows the step.
1. Turn on your computer after you plug your adapter.
2. The system will detect a new device and ask for directory to
access the device driver. Press
Next
to go on.
Chapter 3 Software Configuration
14