AC&NC JetStor NAS 724UX, Руководство пользователя

Страница: 53 / 117

Copyright@1994~2015 Advanced Computer & Network Corp. All Rights Reserved. 53
JetStor NAS 724UX / 724UX 10G – User Manual
The system will shut down either Shutdown battery level (%) or Shutdown delay (s) reaches the
condition. User should set these values carefully.
Network Configuration
The Network configuration menu option is for accessing the Network Setting , DNS Setting , and IP
Filter Setting options.
Network Setting
The Network setting option is for accessing the LAN ports. It is used to change IP addresses of
network ports. The various controllers have different network port configurations:

724UX: 7 x GbE ports per controller.

724UX 10G: 2 x 10GbE ports (SFP+) + 7 x GbE ports per controller.
Each port must be assigned its own IP address. They need to be configured in multi ‐ homed mode,
or a present link aggregation / trunking mode. When multiple LAN ports are set up in link
aggregation or trunking mode, all the LAN ports share the same IP address.
Every LAN port can be managed by Web UI and JetCentral which is a central management
software. In addition, GbE and 10GbE LAN ports cannot link aggregation each other either. The
following table describes the relationship with the service and the network ports.
This table shows the column descriptions.
Column Name Description
Name Port name.
Ling Link up or down.
LAG Link aggregation status.
LAG No Link aggregation number.
VLAN ID VLAN number.
Protocol Use IPv4 or IPv6.