ADSP 8
41
41
D. The input noise threshold: this function sets-up an input signal
threshold. If the input signal is higher than the threshold value, there is output. If
the input signal is lower than threshold, there is no output. If the setting is
reasonable, that makes the system quieter even without the normal music input.
Click the white text area and input values when it changes on cursors, then adjust
the input value of the noise threshold. (Range of intervention: -119.0dB~ -20dB,
OFF).
#2 Network Setting:
A. IP address: input values in the IP textbox, which can set the IP address
of this machine built-in or external WiFi.
Note:
the default IP address is 10.10.100.254
B. Network port: left-click the white text area of the port and input values
when it changes on cursor, then you can adjust the built-in or external WiFi
network port.
Note:
the default network of the machine is 8899
#3 Limiter Setting:
A. Clipping level: this dimension of the signal output in use rises to the
values of the level and when the limiter is activated and makes sure the level of
the output signal, does not exceed the level of the limiter. The adjusting range:
-30dB to 11.9dB, shut down. 0.1dB step per each adjustment. Choosing “OFF”,
the limiter will turn off. The value of the limiter level normally can be set with an
input sensitivity 2dB~4dB higher than the value of power amplifier. For example, it
is possible to obtain a sensitivity of 0dB amplifier from the manual and you can
set the level of the voltage l3dB when you connect the processor channel
to the amplifier. Also, the other much more precise setting method: connect the
system, and increase the input signl music gradually, adjust the limiter level till the
amplifier clipping light is blinking, listening that the sound from the speakers is
very loud without stopping, which is the best situation.
B. Response time: it means when the output signal level over our setting
limiter level, how long the limiter will start to work. If the response time is very
short, this will affect the dynamics of the music sound head and strength. If the
response time is very long, that will affect the degree of natural music and
transient, also, it will cause certain delay and turbidity. So, it’s better to adjust the
response time shorter. Adjusting range: 0.3mS to 200mS.
Setting advice: better bass signal response time: 60mS~80mS, better midrange
and tweeter signal response time: 20mS~40mS.
