ACA SPC-01 Скачать руководство пользователя страница 4

8.

 

DAC Control 

The DAC output is fully automatic therefore there are no user adjustable parameters.

             

                                      

 

Please note:

 

If this system is used in a vehicle to control cabin pressure, ensure that the static 

pipe is placed in a position where it is out of direct air flow when the vehicle is moving at speed 
as this will result in pressure reading fluctuations due to varying pressures detected on the 
static pipe. 

 

9.

 

Precautions 
 
Handling: This is a very sensitive instrument with delicate internal electronics so careful 
handling is highly recommended. 
 

Transport: When transporting, please ensure that adequate packaging is used to reduce the 
chances of damage to this instrument. 
 

Mounting: Always mount this instrument in a safe location unlikely to be knocked or hit and 
ensure adequate cable protection to reduce the chances of it being cut or damaged during 
normal operation. 
 
Do not mount near water or where it is likely to suffer from condensation or moisture as that 
can cause irreparable damage to the internal electronics. 
 

10.

 

Warranty 

All our products come with a standard warranty period of 12 months from the date of purchase, against any 
manufacturing faults or defects and can be replaced free of charge at our Springwood facility in Queensland if 
proved to be a manufacturing fault. 

We will not be responsible or liable for any damages caused to or for loss of machinery, equipment, production 
costs, shipping, or handling in the event of a unit failure and will not be liable for any third-party claims. 

Our warranty does not cover faulty controllers due to improper or faulty installations, bad or wrong electrical wiring 
and excessive voltages leading to electronic or electrical damage or physical shock due to the device being dropped 
or installed in an area with excessive vibration and does not cover the pressure sensor failure when the pressure or 
application exceeds those parameters stated in these instructions. 

 

For technical support please contact: 

AUS Controls and Automation Pty Ltd 

Tel: +61 7 3208 5448 

Mob: +61 427 702 691 

Website:  

www.auscontrols.com.au 

Email: 

[email protected]

 

Отзывы: