MULTIZONE CONTROLLER
CONTROLLER 8
MULTIZONE CONTROLLER
The Multizone controller enables you to control cooling fans in four different zones with
independent programming settings for each zone. Pressing the zone change button
will cycle through these zones as shown by A, B, C, and D icons on the LCD display.
On the back side of the controller, there will be one probe and fan port underneath each
corresponding A, B, C, and D designation. Fans and thermal probes plugged in these
ports will follow the programming you have set for each A, B, C, and D zone.
PROGRAMMING MODES
The Multizone controller has the same modes as the standard controller. Press the MODE
button to cycle through the modes: Auto, Smart, On, Off, and Alarm. Note that each zone will
have it’s own settings. Please refer to pages 18 to 22 for programming instructions.
OTHER SETTING DIFFERENCES
To set the temperatures to Fahrenheit or Celsius scale, hold the ZONE CHANGE button
together until F° or C° is shown after the digits. All digits displayed will be automatically
converted to the designated scale. To put the controller into energy savings mode, hold the
ZONE CHANGE and MODE button until the screen turns blank. Press any button to display
the screen contents again. The programs will still run in the background when the screen is
blank. Return to factory setting, hold the UP and DOWN buttons together.
23
AC INFINITY
POWER
SENSOR
FANS
LABEL
ALARM
SETTING
F
o
F
o
PROBE
F
o
