AC Infinity ADVANCE GROW, Руководство пользователя

Страница: 87 / 100

87
TRANSITION HUMIDITY SETTING
Customizes how the device will ramp
up in levels when triggered ON by
humidity in AUTO MODE. Set a transition
threshold to determine how much the
probe humidity would need to surpass
your trigger point for the device to
increase in level by one. The higher the
transition threshold figure is set to, the
more the probe humidity would need to
surpass your set humidity trigger for the
level to increase. The lower the figure,
the less the probe humidity would need
to surpass your set humidity trigger for
the level to increase. If the figure is set
to zero, it will jump to your maximum set
level without ramping when triggered ON.
Press the up or down button to cycle
through 0% to 8% to set a transition
threshold. The level will be set one level
above the OFF Mode level when the
sensor humidity first meets or exceeds
the high humidity trigger. For every
transition threshold crossed, the level will
ramp up by one level, up until it reaches
the level set in ON Mode.
In this example, your high humidity
trigger is set at 67%, the OFF Mode level
is 2, and the ON Mode level is 7. If the
transition threshold is set to 0%, then the
devices will trigger to run at level 7 when
the sensor humidity meets or exceeds
67%. However, if the transition threshold
is set to 5%, then the fan will trigger to
run at level 3 when it meets or exceeds
67%. It will then step up to level 4 when
meeting or exceeding 72%, level 5 at
77%, and level 6 at 82%. From 87% on, it
will run at level 7, the level set in
ON Mode.
Level
CONTROLLER 69
PROGRAMMING