A
B
C
DETAIL A
SCALE 2 : 5
2:
Tighten the M6 set screws
(2 pcs) with 3-5Nm
recommended torque.
(Use loctite on the set
screws for extreme
cases - Not supplied)
1:
Assemble the top and middle
antenna sections with 20-25 Nm
recommended torque
DETAIL B
SCALE 2 : 5
3:
Assemble the middle and
bottom antenna sections with 80-
100 Nm recommended torque
4:
Tighten the M8 set
screws (3 pcs) with 6-8 Nm
recommended torque.
(Use loctite on the set
screws for extreme
cases - Not supplied)
DETAIL C
SCALE 1 : 3
(Only applicable for coax cable installation type -1 and -2)
Grounding Cable
(Termination is
system dependable)
Connect coax
shield here
Connect coax
center here
TX15 Tapping Screw
fixes box to antenna
Installation Guide
This is a guide only and does not form any contract or warranty
AC Antennas A/S
Fabriksparken 40, DK-2600 Glostrup, Denmark
WWW.ACANTENNAS.COM
This drawing and the contents herein are property of AC Antennas A/S and is strictly confidential. Complete or partly reproduction of this drawing or construction of any of the parts shown herein is strictly forbidden without prior written authorization by AC Antennas A/S.
