18
4. Continue driving the tug under the tire until the rear gate locks onto the latch and the
wheel ramp is in the up position.
5. The Lazy Susan Lock switch on the radio can be moved to the unlocked position
during operation to allow
180° of rotation
, refer to section 2-1.
6. The circuit breaker reset buttons will trip if the tug is overloaded. To reset the circuit
breakers open the access cover and locate the two white or black buttons on the
circuit board. See image above. Press them down to reset the circuit breakers.
Rear Gate
Locked into
Latch
Wheel Ramp in
Up Position
Circuit Breaker
Critical Note:
If the circuit breaker buttons pop up after being reset, the tug is being overstressed
and could cause damage to the circuit board. Address any mechanical issues such
as a seized sprocket or missing track retainer clips or any driving conditions such as
driving up a steep incline or towing above the tugs capacity that could be causing
the tug to overstress. If the issue persists call or e-mail AC Air Technology tech sup-
port for further assistance.
