14
2-3 Loading the Aircraft Wheel
2. Start-Up Guide
Wheel Ramp
in up position,
facing forward
Rotate Lazy
Susan
WARNING:
DO NOT PUT ANY PART OF YOUR BODY IN THE MECHANISM WHILE
RELEASING THE LATCH. SEVERE BODILY INJURY CAN OCCUR.
1. Once the pre-load setup is complete turn ON the tug power switch and remote
controller power switch. The wheel ramp needs to be in the down position before
loading the aircraft wheel. If the wheel ramp is in the up position then hold the latch
release switch on the radio controller and slowly rotate the lazy susan with the con-
troller until the latch releases the ramp and it falls to the down position. The ramp
release only occurs when the lazy susan is oriented with the wheel ramp facing
forward. Once the wheel ramp is in the down position toggle the latch release switch
to the middle position, locking the lazy susan from rotating.
WARNING:
DO NOT SIT IN THE PLANE WHILE DRIVING THE TUG.
TO PREVENT GOING BEYOND YOUR STEERING LIMITS IT IS HIGHLY
RECOMMENDED THAT YOU LOCK THE LAZY SUSAN FROM
ROTATING WHILE GOING UP AND DOWN HILLS AND MOVING
ALONG A STRAIGHT PATH. THE LAZY SUSAN FEATURE SHOULD ONLY BE
USED ON FLAT GROUND AND WHEN MANEUVERING IN TIGHT QUARTERS.
