abyzz AFC400, Руководство пользователя

Страница: 13 / 30

!
Usage
In the "Permanent" operating mode, you can start or stop the motor with the
"Start / Stop" key and change the speed using the "Up" and "Down" keys. If you
wish to permanently store the new speed, press the "M" key and the last value is
retained. The "Start / Stop" setting is automatically stored so that the pump
automatically returns to the original operating mode after a loss of the operating
voltage or after actuation of the main switch.
If you want to enter the menu to display operating data or to program the pump,
press the "M" key. An overview of the menu can be found in the appendix under
P4.
You enter the menu and the current operating mode is displayed. Press the "up"
and "down" buttons to navigate the menu. The current software status, the
operating hours and the operating mode are displayed consecutively. Furthermore,
the driver address can be displayed and deleted.
The contrast of the display can be set in the corresponding overview by holding
down the "Start / Stop" key and pressing the "Up" or "Down" keys.
If you wish to change the operating mode, press the "Start / Stop" key when the
operating mode is displayed. You can now set the operating mode with the "up"
and "down" buttons. The different operating modes are:
- Permanent: The pump runs permanently at a fixed speed.
- Wave: The pump switches between two fixed speed settings in adjustable
times.
- Random: The pump will change the speed within an adjustable minimum
and maximum value in an adjustable time
- Random 2: Same as Random, but the time between bills is randomly
selected.
- BOOST MODE: When the BOOST mode is activated, the pump generates
a separate interval, regardless of the programmed operating state, e.g. to
stir up detritus.
! 13